Payment & Shipping Terms:
|Material:||Alloy Steel||Type:||Excavator Spare Parts|
|Usage:||Loader||Suitable:||1.5-4 T Excavator|
excavator tilt hitch,
excavator quick attachm
Quick Hitch Excavator Attachment Electronic Drive System Excavator Accessories
Grab, it is the special tool that points to crane to grab dry and loose goods.It is composed of two or more pieces of bucket jaw that can be opened and closed together to form a storage space. During loading, the jaw is closed in the material heap and the material is caught into the storage space. During unloading, the jaw is opened when suspended on the material heap and the material is scattered on the material heap.Grab is a main tool for dry bulk cargo loading and unloading in port, which can achieve high loading and unloading efficiency and ensure safety without heavy manual labor.According to the type of goods in operation, it can be divided into ore grab, coal grab, grain grab, wood grab and so on.
|Pin to Pin Center Distance||Mm||80-150||230-270||290-360||380-420||460-480||473-540||550-620|
|Forearm Open Width||Mm||80-140||155-170||180-200||232-315||306-340||375-411||416-469|
of Oil Cylinder
|Top to Bottom Pin Distance||Mm||159||195||195||220||275||300||360|
|Required Oil Flow||L/min||10-20||10-20||10-20||10-20||10-20||10-20||10-20|
In people's general impression, an excavator is an earth-rock machine that uses a bucket to excavate materials above or below the surface of the carrier and into the transport vehicle or to the stockyard. In fact, in addition to excavating earth and stone, the excavator can also perform corresponding construction operations by replacing the ripper, breaker, hydraulic shears and other components. When the excavator operator replaces the configuration parts, it is rare to use one. . The excavator quick connector is also called quick-change connector and quick connector. Through this device, various configuration parts can be quickly installed and switched on the excavator, thereby expanding the scope of use of the excavator, saving time and improving work efficiency. The excavator quick connector belongs to the structural parts and is composed of main body bracket, movable block, hydraulic cylinder and pin shaft. By using the quick connector, the excavator configuration can be replaced without modification or disassembly of the pin, so installation is quick and the work efficiency is greatly improved. When replacing various configuration parts, there is no need to manually smash the bucket pin, and the switch can be completed by gently moving the switch for ten seconds, saving time, labor, and convenience.
1. Application: For quick change of all kinds of excavator accessories (such as bucket, breaker, shear, etc). With fast installation and high efficiency.
2. Use high strength steel Q345B/QA60D
3. Adopt hydraulic one-way valve to ensure safety
4. Suitable for 4-45 ton excavators
5. High quality hydraulic cylinde
Application: For quick change of all kinds of excavator accessories (such as bucket, breaker, shear, etc). With fast installation and high efficiency.